STAR Pass-2 Biodegrable Chelant Passivation for Stainless Steel

STAR Pass-2 is a natural organic liquid chemical compound that is used for cleaning and passivating SS equipments in food, dairy, cosmetic, beverage and pharmaceutical industries. This chemical compound has common edible material that works as a catalyst for Stainless Steel Passivation.
STAR Pass-2 is environment friendly due to its biodegradable, non-hazardous, and non-toxic properties. Due to its compatibility with environment, it can be easily fused into sanitary sewage systems. This STAR product is well-acclaimed and worldwide accepted technology.
Area Coverage per kg : Approximately 40 sq.ft.
  1. Gives superior and faster removal of free iron from SS surface without touching or damaging the parent metal
  2. Does not have impact on epoxy flooring
  3. Ideal for intermediary cleaning in-between production lots
  4. Useful in pre and post operational cleaning of Stainless Steel equipments
  5. Produces a truly passive surface area and the chelating agents have no negative impact on the SS surfaces thus making the SS metal completely corrosion resistant
  6. Environmentally safe offering ease in disposing in sewage system
  7. Enhances the passive layer on SS giving an optimum chrome iron ratio thereby making the surface corrosion resistant
  8. Increases corrosion resistance ability when applied over pickled and electro-polished surfaces
  9. Provides a non-rusting and clean surface area
For Passivating Mirror Bright Buffed / Polished Stainless Steel Areas
The below mentioned procedure will maintain and retain the shine of mirror bright buffed or polished Stainless Steel areas. Moreover, it will provide contamination-free & sterile particle free passivated SS surface.
  1. Apply STAR Gel on weld seam & areas surrounding to welds using a nylon-bristled plastic brush. After 15-30 minutes, wipe with plastic brush or cloth and rinse thoroughly with water.
    (Tip: Applying of STAR Gel prevents weld seams from rust that is usually observed after bright buffing)
  2. Complete the procedure of bright buffing or polishing for making the surface mirror bright and shiny.
    (Tip: If SS pipe or equipment is already polished or bright buffed then refrain Step 1 and 2. Start the following steps)
  3. Use STAR 100, a sulphur-free degreaser, for removing buffing compounds, dirt, oil, etc.
    Add 50-75 gm/litres in water (1kg STAR 100 in 15-20 litres water), stir to dissolve. Wipe SS surface with cotton/ pressurised spray for 3-5 minutes or soak small parts for 10 minutes. Rinse the surface thoroughly with water and allow it to dry.
  4. Dip or Spray in STAR Pass-1 or Star Pass-2 and leave it for about 15-25 minutes. Rinse thoroughly with water.
1kg, 5kg, 20kg, 30kg, 50kg Carboy.

Popular in Pickling and Passivation Industry.

All Products IIT approved under ASTM-A380 standards