Spatter Remover 511 Anti Spatter Cream

Innovating the Art of Welding with Spatter Remover 511

Spatter Remover 511 is an innovative product that has transformed the welding methods. This innovative product is silicone free, non-flammable, non-toxic, and non-polluting Welding Anti Spatter and flux in emulsion form.
Benefits of Spatter Remover 511 Spatter Remover 511 is applied before starting the welding procedure for achieving the below mentioned benefits:
  1. Grinding and Chipping not needed for removing spatters
  2. Slag are easily removed
  3. Drastic reduction in cleaning cost
  4. Dense and clean weld joint
  5. Gaseous and non-metallic inclusions are minimized
  6. Tremendous improvement in the efficiency of welder
  7. Gently removes spatters thus maintains smooth parent surface
  8. Eco-friendly product as it is free from chipping and grinding procedure
  9. Preferred by ISO-14000 organization, no health hazards thus safe for welders
  10. Enhances mechanical and metallurgical properties of weld metal.
Spatter Remover 511 is time-tested by NABL recognized lab in Mumbai, India whose results are officially approved by several Government departments & chief inspection agencies. Spatter Remover 511 proves efficient when undergone various mechanical tests such as bend test, load test, tensile test and radiography test, showing advancement in weld joint quality with use of Spatter Remover 511.
Due to this technological breakthrough product, you will completely eliminate laborious & time-consuming chipping and grinding operations required for removing weld spatters thereby obtain better weld joint quality.
Area Coverage per kg: Approximately 80 to 90 running meters.
Spatter Remover 511 is an innovative product in welding process technology that will improve the quality of weld metal.
Features of Spatter Remover 511:
  1. Incombustible, non-toxic and safe to use Non-pollutant thus environment friendly Silicone free
  2. Emulsion form – use special spray bottle or apply with brush
  3. Easy to apply on required area, no wastage
  4. Easily removed from metal surface after welding for further painting
  5. Tremendously reduces noise and air pollution in the workshop meeting the WHO guidelines for the industry
  6. Enhances depth of penetration as the heat loss from top of the weld metal is held by the film, conserving around 5-10 percent of energy
  7. Acts as a temporary rust preventive for about 10 days (helpful in avoiding V-groove flash rusting and hence abandons re-grinding of V-groove prior to welding)

Suitability of Spatter Remover 511:

Spatter Remover 511 can be applied to any kind of weld metal including arc, manual, CO2, argon, MIG, etc. for any kind of ferrous materials such as CS, SS, MS and all alloy steels. Spatter Remover 511 is ideal for fabrication of industrial equipments, tanks, boilers, vessels, pipelines, fabricated pinions and gears etc.

How to apply Spatter Remover 511:

  • Stir the container well before using
    The application surface must be free from grease and oil etc.
  • Apply a thin and uniform film of Spatter Remover 511 on any metal surface with any brush; or use a special spray bottle/system on both sides of welding surface – prior to welding. (Around 3–4 inches where spatters are likely)
  • Start welding on the metal surface to be welded only after Spatter Remover 511 has dried completely
  • Remove Spatter Remover 511 film along with welding spatter particles using a separate fresh cloth or a dry brush, any time after welding

1kg and 5kg Carboy.

Popular in Pickling and Passivation Industry.

All Products IIT approved under ASTM-A380 standards